GW Instek SFG-1000 Series - Manual (Page 25)

TTL Output
25
T
TL OUTPUT
Activate TTL Activate TTL ......................................................... 25
Set frequency Enter frequency .................................................... 26
Edit frequency ...................................................... 26
Maximum frequency limit error ............................ 27
Minimum frequency limit error............................. 27
Set duty cycle Enter duty cycle.................................................... 27
Activate TTL
Select TTL
1. Press the Output key. The LED
turns On. (TTL does not activate
unless the output is already On)
SHIFT WAVE
2. Press the Shift key, then the
Wave key. TTL indicator appears
on the display.
OUTPUT
3. The waveform comes out from
the TTL output terminal.
Level: ≥3Vp-p