Detcon SmartWireless CXT - Manual (Page 21)

Sentinel CXT
Sentinel CXT Instruction Manual Rev. 1.5 Page 17 of 42
11. Remove the 6-32 screws and washers holding the battery bracket is place, and remove the bracket
from the enclosure. Retain the screws and washers for installation of the bracket with the battery
pack.
Figure 15 Battery Bracket in position
12. Install the battery pack in the bracket. The battery will fit snugly into the holder, being somewhat
held in place by the foam padding in the bracket.
Figure 16 Battery and Battery Bracket