Detcon SmartWireless CXT - Manual (Page 20)

Sentinel CXT
Sentinel CXT Instruction Manual Rev. 1.5 Page 16 of 42
Battery Installation
9. Loosen the screws holding the door panel in place, and swing the front door of the enclosure open
to gain access to the battery bracket.
Figure 13 Enclosure
10. Unplug the connector from the transceiver, and move it out of the way to gain access to the screws
holding the battery bracket in place. There should be enough of a service loop to safely move this
connector out of the way for removal/installation of the battery bracket.
Figure 14 Connector to Transceiver