AW Gear Meters EMO-1005 - Manual (Page 12)

AW-Lake Company 8809 Industrial Drive, Franksville, WI 53126  web: www.awgearmeters.com
 Tel: 262-884-9800  Fax: 262-884-9810  Email: [email protected]
REV. 1a 05/98 EMO-1005 Manual.DOC
11
In the following lines the menu questions are listed in the order they appear while in programming
mode:
QUESTION: ANSWER:
Display 1 RATE SCALING ?
0 = NO and 1 = YES 0 or 1 ENTER
Display 2 TOTALIZER SCALE?
0 = NO and 1 = YES 0 or 1 ENTER
Display 3 LIMITS? (none=0)
RATE=1 TOTAL=2 0, 1 or 2 ENTER
Display 4 ANALOG GAIN (KFA)
CURRENT=00000167 Enter new KFA
ENT alone is no change
(167 is default)
Display 5 OFFSET ANALOGOUT
CURRENT=00000205 Enter new number
ENT alone is no change
(205 is default)
Display 6 SAMPLE AMOUNT
CURRENT=00000008 Enter new number
ENT alone is no change (8 is default)
Display 7 CUTOFF FREQ.
CURRENT=00000050 Enter new number
ENT alone is no change (50 is default)
Display 8 ANALOG IN GAIN
CURRENT=00000000 Enter new number
ENT alone is no change (0 is default)
(Only used in PID Mode)
In the following sections, all of the previous displays will be explained in detail.