AW Gear Meters MX 9000 - Manual (Page 21)

MX 9000 Process Monitor
Operation and Programming Manual
20
MX 9000 User Manual, Rev. 2.0 7/16/2013
RA/RB screen
The rate A and B screen is another dual combination screen that provides visibility to both rates at the
same time. If the gate time or linearizer are active those will also be indicated by a LN in the lower left
or GT in the lower right of the display.
TA/TB screen
The total A and B screen is another dual combination screen that provides visibility to both totals at the
same time. If the gate time or linearizer are active those will also be indicated by a LN in the lower left
or GT in the lower right of the display. By pushing the
ENTER key you can change the totals displayed to
grand totals and will be indicated by a GA and GB in front of the totals.
RATE A + B screen
The rate A + B screen shows the mathematical sum of the two flows of dual channel units. If the gate
time or linearizer are active those will also be indicated by a LN in the lower left or GT in the lower right
of the display. NOTE: the units of both flows must be the same for this display to work properly. You
will receive a warning message if you do not have them matching.
RATE A - B screen
RA 34.00 GPM
RB 56.00 GPM
TA 500.00 GAL
TB 800.00 GAL
RATE A + B
600.00 GPM
RATE A - B
0.16 GPM