Avigilon Access Control Manager - Identity Enrollment and Credentialing User Manual
Page 9
Identity Enrollment and Credentialing User Guide
5
12. Review the roles that this person can currently access and the doors that these roles
support.
If necessary, you can return to the Roles page and redefine the roles this person is
assigned.
For a full description of the fields and buttons that appear on this page, refer to Access
Page
13. Click the Capture tab.
The Capture page appears like this example:
If the capture device has been secured by a user name and password, this page will not
appear until you have supplied the required values to the authentication prompt like
this:
Supply the required user name and password then click OK and the Capture page
should appear.
14. To capture a picture from this page using a previously attached and configured camera:
a. Click on the Capture link next to the identity that requires a photo.
The connected capture device takes a picture of the designated person and places
it on the Capture page.
b. To create additional pictures, repeat Step b.
c.
To view all captured pictures for this person, click on the person's name.
The Identities Edit screen appears.
d. Select the Capture tab to view the Identity Capture page.
e. Click to select the image you want to use for the person.
f.
Click
to save this image.
For a full description of the fields and buttons that appear on this page, refer to Capture
Page
15. Click the Photos tab.