Avigilon Access Control Manager - Identity Enrollment and Credentialing - Manual (Page 56)

Identity Enrollment and Credentialing User Guide
52
To add an image capture or video recording device to this system:
1. At the Setup links section of the home page, mouse-over Settings.
A pull-down option list appears.
2. From the available sub-options, select External Systems.
The Cameras listing page appears like this example:
3. Select one of the currently available device types:
• For an IP-based camera, go to step 4.
• For an Exacq server, click the Exacq tab and the Exacq Servers listing page appears.
• For a Pelco server, click the Pelco tab and the Pelco Server listing page appears.
• For a LifeSafety power supply, click the LifeSafety tab and the LifeSafety power
listing page appears.
• For an Avigilon server, click the Avigilon tab and the Avigilon server listing page
appears.
• For the Salient surveillance system, click the Salient tab to bring up the Salient listing
page.
• For the Milestone surveillance system, click the Milestone tab to bring up the
Milestone listing page.
4. From the appropriate listing page, click the Add... button relevant to that device (for the
IP-based camera, the button would be ) or click the name of an existing
device.
The appropriate Add page appears like this example:
5. Enter values as required.
This page includes these fields and buttons:
IP Based Camera
Name
Enter the name of this device. Pick a name that will help identify
the camera.