Avigilon Access Control Manager - Identity Enrollment and Credentialing - Manual (Page 28)

Identity Enrollment and Credentialing User Guide
24
Capture Page
When you click the Capture tab on the Identities screen, a page like this example appears:
If the capture device has been secured by a user name and password, this page will not appear
until you have supplied the required values to the authentication prompt like this:
Supply a user name and password, then click OK, and the capture page should appear.
To capture a picture for this identity, click the CAPTURE link. If there is a camera configured for
this system and a face ready to be captured, an image appears. If an image has already been
captured, it appears where the NO IMAGE AVAILABLE frame appears at default, like this example:
If there is no capture device currently defined for this system, a message appears saying “Capture
Failed”.
Use this page to examine existing captured images and add to them as required. For more on
adding images, refer to Capturing Images for Identities on page 11.
Photos Page
When you click the Photos tab on the Identities screen, a page like this example appears:
This page includes a single button, , that enables the operator to upload an existing
photograph of the user.