Avigilon Access Control Manager - Identity Enrollment and Credentialing - Manual (Page 15)

Identity Enrollment and Credentialing User Guide
11
The Available window is populated with the roles fitting the search criterion.
3. Click to highlight one or more roles that you want in the Available window then click the
button to move roles to the Members window.
4. When you're finished, click .
For definitions on the fields and buttons appearing on this page, refer to Roles Page on page 20.
Capturing Images for Identities
Use an attached and previously configured camera to capture an image for inclusion in the user's
database or with placement on a badge.
NOTE:
Before you can capture an image you must first connect an approved camera to the
system, then configure the device using the External Devices feature.
To capture an image from the individual identity:
1. From the Identities Listing page, select the identity you need.
The Identity properties screen appears.
2. Click the Capture tab.
The Capture page appears.
3. Click the CAPTURE link.
The connected capture device takes a picture of the designated person and places it
on the Capture page.
4. When you're finished, click to save this image.
To capture an image for an identity from the Identities Listing page:
1. Open the Identities Listing page.
2. Click on the Image Capture button next to the identity that requires a photo.
The connected capture device takes a picture of the designated person and places it
on the Capture page.
3. To create additional pictures, repeat Step 2.
4. To view all captured pictures for this person, click on the person's name.
The Identities Edit screen appears.