Avigilon Access Control Manager - Alarm Monitoring - Manual (Page 8)

Alarm & Event Monitoring Operator Guide
4
Viewing Identity Information
Many events are caused by the entry of cards and/or codes, such as when an employee enters a
PIN at a door reader and is granted access. The Access Control Manager application enables the
operator to see who the person associated with the entered token (card or code) is and review the
information entered in the Access Control Manager database.
To review identity information:
1. Select an event associated with an identity.
2. Click the button.
The Identity pop-up screen appears as described in Identity Display on page 35.
3. Review the information on this page which can include a photo enrolled with the
identity.
4. When you’re finished, click the exit button, , at the upper right hand corner of this
page.
Viewing Video Feed
When one or more surveillance cameras have been associated with a specified event or event
location, you can access and view the location where the event occurred using this screen.
To view video coming from a camera feed:
1. From one of the Monitor pages (Events, Alarms, or Search), click to highlight the event/
alarm whose associated camera you want to view.
Only those events or alarms that have a in the left column have been associated with
a camera.
2. Click the button.
The Camera Video window pops up.
For more on this, refer to Camera Video Window on page 36.
3. Using the various controls on this screen, manipulate the camera view. These controls
include: