Avigilon Access Control Manager - Alarm Monitoring - Manual (Page 39)

Alarm & Event Monitoring Operator Guide
35
The lower matrix lists all information about the action that was performed in response to this
alarm/event. The information entered here includes:
Identity Display
Many events or alarms that occur are caused by the entry of a card or PIN at a specific entry or exit
point. In order to help the guard or security operator identify the person who is assigned that card
or PIN code, Access Control Manager provides the ability to pull up the identity of the card or code
holder within the Monitor module.
To do this:
1. Bring up the Event, Alarm, or Search monitor screen.
2. Click to highlight a specific event or alarm.
3. Click the button.
A screen like this example appears:
NOTE:
A screen like this only appears if the system has a record of the card or code holder's
identity.
Notice that this screen includes the relevant information about the card or code holder's identity
as entered in the Identity module.
Event/Alarm
Panel Date The date and time on which this event was recorded by the panel.
Source The point where the event was detected.
Event
Name The name of the event that was detected.
History
Date The date and time when the note was entered for this alarm/event.
Action This indicates the action that was taken. This is normally a note entry; however, it can also be an
action performed by the operator overseeing the event.
Operator The operator who performed the action.
Notes The note entered concerning this action.