Avigilon Access Control Manager - Alarm Monitoring - Manual (Page 35)

Alarm & Event Monitoring Operator Guide
31
Indicates the status of the battery backup on the door. The color indicates the current
status.
Sub-Panel
Status Indicates the number of the sub-panels attached to this panel. Each relevant subpanel is
displayed together with its current status. The color indicates the current status.
Subpanel The name of this subpanel. To drill down into the inputs and outputs associated with this
subpanel, click this link.
C Status of communications between the panel and specified sub-panels. The color
indicates the current status.
P Indicates the status of the power on this panel. The color indicates the current status.
T Indicates the status of the tamper switch on this panel. The color indicates the current
status.
Installed
The status of the sub-panel's installation: or . This field is selectable and can be
toggled.
Input This column lists all the inputs controlled by this subpanel, with the name and address of
each input.
Cmd If allowed, one or more functions that can be performed on the input. The possible
functions are:
– Click this button to mask the designated input.
– Click this button to unmask a previously masked input.
Output This column lists all the outputs (including relays and locks) controlled by this subpanel,
with name and address of each output.
Cmd
If allowed, click one or more of these functions that can be performed on the output.
The possible functions are:
– Click this button to power the output. If this output is a door, it energizes the
circuit.
– Click this button to turn off the power to this output. If this output is a door, it de-
energizes the circuit.
– Click this button to alternately energize and de-energize this output. The pulse
interval is determined by the output’s settings.