Avigilon Access Control Manager - Alarm Monitoring - Manual (Page 5)

Alarm & Event Monitoring Operator Guide
1
Alarm & Event Monitoring
This short guide provides the necessary information you will need to use the Access Control
Manager application Monitor feature.
This feature enables you, the operator, to oversee all security activities throughout the facility that
this Access Control Manager application monitors.
Opening the Monitor Feature
To use the Monitor feature, follow these simple instructions:
1. If closed, open the Access Control Manager application.
If already open, skip to Step 2.
2. At the Access Control Manager home page, click the Monitor icon from the icon task
bar as shown below:
The Event Monitor feature appears with the Events page uppermost like this example:
The pages of the Monitor feature enable the operator to view second-by-second information
about events and alarms occurring throughout the system.
This feature also provides a search filter to specify which physical devices to display as well as a
verification tool to ascertain whether a specific code or card is properly assigned. The monitor
screen is divided into six pages:
• Events – Display the events polled on this system.
• Alarms – Display the alarms detected by this system.
Click this icon