Avigilon Access Control Manager - Alarm Monitoring - Manual (Page 12)

Alarm & Event Monitoring Operator Guide
8
Clearing All Alarms
Only those alarms that have been previously acknowledged and moved to the Acknowledged
window can be cleared. Once cleared, the alarm is deleted from the database.
NOTE:
This is not the recommended technique for clearing alarms, since it may overlook an alarm
that requires special attention.
To clear all alarms:
1. Display the alarm page.
2. Click the button.
All acknowledged alarms are deleted.
Making a Note
Operators are often asked to make a note on a specific alarm.
To note an alarm:
1. Display the alarm page.
2. Click to highlight the required alarm.
3. Click the button.
The Notes page pops up as described in Notes Page on page 33.
4. Enter a note on this alarm as required in the new note area.
5. Click the button.
6. Click the button to exit this page and return to the main Alarm page.
Getting Instructions
Depending on how the system is configured, a particular kind of alarm may be associated with
instructions on how to respond.
To access instructions:
1. Display the alarm page.
2. Click to highlight the required alarm.
3. Click the button.
The Instructions page appears as described in Instructions Page on page 34.
4. Read the instructions and perform the tasks specified.
5. When you’ve finished with the instructions, click the exit button, , at the upper right
hand corner of this page.
6. Make any notes you need as described in Making a Note on page 2.