Avigilon Access Control Manager - Alarm Monitoring - Manual (Page 15)

Alarm & Event Monitoring Operator Guide
11
The Video window appears.
For more on this window, refer to Page Descriptions on page 21.
2. From the video pane on the left, select the previously recorded video.
3. Using the playback controls at the bottom of the screen, play the video segment as
required.
4. When you're finished, exit the screen by clicking the button in the upper right corner
of the window.
NOTE:
To send a video segment to another place, such as the police or a lawyer, refer to the
instructions that come with this recording server.
Turning Sound On/Off
In its default condition, every alarm that is displayed by the Alarms page is accompanied by a
beeping sound. While this is normally a useful way for the operator to keep track of incoming
alarms, it can become irritating when it goes on too long.
To turn the sound off:
• From the Alarm page, click the button. The beeping sound is silenced and the
button appears.
To turn the sound back on:
• From the Alarm page, click the button. The beeping sound recurs and the
button reappears.
Searching for Events and Alarms
Large numbers of alarms and events are generally polled during the course of a single day for
even a small installation. Over the course of several days or weeks, the number of alarms can
become truly vast. To filter alarms and events down to a manageable size, use the following
feature.
To search for a specific event, alarm, or item within the monitor database, do this: