Seed Hawk AIRCART 2015 - Manual (Page 83)

SEED HAWK ® 2015 AIRCART OPERATOR’S MANUAL 78
Possible Cause Solution
No hydraulic pressure. Engage hydraulic circuit (wing down).
Product control switch is
off.
Turn product control switch to auto.
Roller is jammed.
Remove roller from meter body and remove
obstruction from meter.
Check air cart node. Check lights on front of node.
Check meter settings.
Make sure that the meter cal and cal weight is
entered correctly.
Possible Cause Solution
No field boundry recorded. Create a field boundry.
Agressiveness is on.
Turn aggressiveness off.
Improper look aheads. Adjust look ahead time.
Possible Cause Solution
No field boundry recorded. Create a field boundry.
Agressiveness is on.
Turn aggressiveness off.
Improper look aheads. Adjust look ahead time.
Possible Cause Solution
No hydraulic pressure. Check and re-align sensor if necessary.
Product control switch is
off.
Set fan cal to 2.
Check air cart node. Set diverter to the fan position
Possible Cause Solution
Speed settings set incor-
rectly Check speed calibration settings on Loup III or
Viper Pro™.
Meter Roller Won’t Turn
Outer Opener Sections Engage When Turning
Meter Gate Alarms Going Off
No Fan Speed
No Tractor Speed