Seed Hawk AIRCART 2015 - Manual (Page 80)

SEED HAWK ® 2015 AIRCART OPERATOR’S MANUAL
7. Weigh the filled calibration bucket, enter the weight of the product caught.
Toggle the
Left and Right Soft Keys moving the arrow under the desired digit
to edit, press the Soft Key labeled "ENTER" to modify the digit. Toggle between
"INC" and "DEC" to change the digit value.
8. Once the weight is entered, toggle to the right until "SEND" appears. Press
the
Soft Key labeled "SEND" by pressing the corresponding Soft Key to save
the calibration number to the Viper Pro™. Repeat the steps for the remaining
meters.
Information is instantly sent to the Seed Hawk Viper Pro™ monitor. After all
meters are calibrated, power down the Remote tank calibration console and
disconnect from tank harness. It is recommended to repeat the calibration to
avoid operator error. To turn off remote calibration console, press and hold the
blue
Power Key until the monitor powers down.
ATTENTION! DO NOT include the weight of the calibration bucket
in the metered weight value.
NOTE: DO NOT leave the
Remote tank calibration
console attached to the tank
exposed to the weather. Re-
fer to the Calibration Guide
for alternative tips and rec-
ommendations for calibrating
the Aircart Meters.
75
1. Power up remote calibration console
2. Select desired meter to calibrate
3. Prime roller
4. Begin calibration and enter the weight of product
Viper Pro™ Quick Start Calibration