Seed Hawk AIRCART 2015 - Manual (Page 49)

SEED HAWK ® 2015 AIRCART OPERATOR’S MANUAL 44
1. Press the Power Key to begin.
2. As the Seed Hawk Logo is dis-
played, the monitor performs a self-
test. During this self test, the monitor
will check that all learned sensors are
connected.
3. Once this test is complete, all sen-
sors found by the system are listed as
shown in the image.
4. Press the Soft Key labeled “OK”
to continue to the Normal Operate
Screen.
NOTE: For everyday op-
eration, the monitor will
remember all settings that
have been saved from the
previous use.
Activate Clutch Key: This key is used to engage or disengage the clutch.
(Reminder: Clutch Status is indicated in the Top Section of the Display).
Meter Rate Screen: Pressing this key brings up a screen which allows adjust-
ing meter application rates and turning meters on and off.
Soft Keys: These keys represent settings menus. They displayed option on a
soft key may be different depending on the menu the operator has chosen. The
User pushes these key to make the displayed selection
7.2 Normal Start up