Seed Hawk AIRCART 2015 - Manual (Page 35)

SEED HAWK ® 2015 AIRCART OPERATOR’S MANUAL 30
4.4.1 Positioning The Conveyor
NOTE: Ensure that the area
in the vicinity of conveyor
operation is free of obstruc-
tions and that all bystanders,
especially children, are kept
at a safe distance before
positioning or operating the
conveyor.
NOTE: If remote does not
operate properly use manual
levers provided as backup
control
2. Remove pin from outer arm lock-
ing mechanism and unlatch.
1. Ensure the tractor circuit is engaged in the correct direction prior to en-
gaging the conveyor diverter valve. If circuit is already engaged, direct the fan
diverter valve to the conveyor position from the fan setting. Use the remote
provided to move the conveyor in and out of transport.
3. Remove pin from rear locking arm,
swing out handle, and release
conveyor.
4. Maneuver conveyor, using tilt cylinder first to lift conveyor out of the front
saddle.
6. Hydraulic cylinders will hold the position so conveyor will not move even if
placed on uneven terrain.
5. Move the outer arm and then the inner arm to position conveyor where fill-
ing or emptying the Aircart is optimal. Unlatch and unfold the conveyor hopper.