Seed Hawk AIRCART 2015 - Manual (Page 33)

SEED HAWK ® 2015 AIRCART OPERATOR’S MANUAL 28
4.3.4 Auger Transport Position
1. Position the auger so that the tube
is resting on the locking mechanism
at the back of the aircart. In TBH
configurations only, the hopper can be
rotated down for transport. 2. The locking mechanism must be
used to secure auger when transport-
ing at all times.
3. Be sure to secure locking mecha-
nism by replacing pin. 4. Lift and swing handle in towards
the aircart, then pull down to secure
it. Push the auger diverter valve back
to the fan position
NOTE: Fill auger should
always be secured for trans-
port, no matter how short
the distance. Clean out auger
prior to transport or storage.