Seed Hawk AIRCART 2015 - Manual (Page 64)

SEED HAWK ® 2015 AIRCART OPERATOR’S MANUAL 59
7.5.5 Seeder Stationary Mode
NOTE: This selection must
be disabled before actual
seeding is started.
This selection allows the operator to enter a fake ground speed so the entire
system can be run for a system checkout before entering the field. The entire
system must be functional to use this selection.
1. Using the Navigation Keys or the
Selector Knob, highlight and select
“Seeder Stationary Mode.”
4. Increment: This value is the increment value for on the go rate adjust-
ments when seeding. The default value is 5.00 lb/ac.
5. OK/Cancel: Select “OK” to save any changes made. Select “Cancel” to
ignore any changes made.
4. Select “Enable” and enter a fake
ground speed.
2. Dialogue box will appear displaying
status. Using the
Selector Knob
highlight “Disabled” and press to open.
3.Using the Navigation Keys or
Selector Knob, highlight “Enable.”
Confirm selection by pressing the
Selector Knob or the Enter Key.