Seed Hawk AIRCART 2015 - Manual (Page 32)

SEED HAWK ® 2015 AIRCART OPERATOR’S MANUAL 27
4.3.2 Operating the Auger
4.3.3 Auger Position for Unloading Aircart
1. Ensure that all screens and shrouds are in place and that the cleanout gate,
on the bottom of each meter, is closed.
2. Activate tractor hydraulic circuit
#4, and direct the diverter valve up to
the auger circuit.
1. Using your remote, allow the auger
tube to pivot under any of the aircart
compartments in order to empty
them.
2. Loosen the cross thumb-nuts on
the cleanout gate (refer to Section
4.4.2) and slide it up to allow product
to fall between the airstream tubes.
3. Once emptied, the bottom air-
stream door can be removed for
complete cleanout below the meter.
3. The handle on the auger tube is
the control to operate the auger
flighting in a forward or reverse
direction.
4. Whether filling or unloading the Aircart, the auger performs at its highest
capacity when product is falling directly into the flighting.