Seed Hawk AIRCART 2015 - Manual (Page 53)

SEED HAWK ® 2015 AIRCART OPERATOR’S MANUAL 48
7.3.5 Layout Menu
7.3.6 MuxBus Sensor Setup Menu
This Soft Key Menu allows the user to configure the User Selectable Display
Window Layout based on the amount of information desired to be displayed.
This Soft Key Menu selection allows
the operator to access system set-
tings, calibration settings and factors,
as well as install, configure and cali-
brate all sensors and settings for the
monitor system.
Highlight the desired Layout Option
using the
Selector Knob or the
Navigation Keys. Finalize your
selection by pressing the
Selector
Knob or the Enter Key.
NOTE: The VAR Controller
listed is not used in this appli-
cation.
The Setup Menu is accessed from the main screen by pressing any Soft Key to
bring up the Soft Key Menu, then pressing the Soft Key labeled "Setup."
7.4 Menu Settings
NOTE: The pressure sensor
listed as a MuxBus sensor
is available but a different
sensor than the Packing
Pressure sensor. That sensor
is connected to the hydraulic
drive control module and is
communicated on the CAN
network. It is called Shank
Pressure in the layout item
select menu.
When the "Setup" Soft Key
is pressed the Menu Settings
screen lists 12 choices