beautypg.com

General troubleshooting, Licenses, Time – Brocade Fabric OS Troubleshooting and Diagnostics Guide (Supporting Fabric OS v7.3.0) User Manual

Page 27: Chapter 2, Chapter 2, “general troubleshooting

background image

Fabric OS Troubleshooting and Diagnostics Guide

11

53-1003141-01

Chapter

2

General Troubleshooting

In this chapter

Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Frame Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Switch message logs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Switch boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

FC-FC routing connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Licenses

Some features require licenses in order to work properly. To view a list of features and their
associated licenses, refer to the Fabric OS Administrator’s Guide. Licenses are created using a
switch’s License Identifier

so you cannot apply one license to different switches. Before calling your

switch support provider, verify that you have the correct licenses installed by using the licenseShow
command.

Symptom

A feature is not working.

Probable cause and recommended action

Refer to the Fabric OS Administrator’s Guide to determine if the appropriate licenses are installed
on the local switch and any connecting switches.

Determining installed licenses

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the licenseShow command.

A list of the currently installed licenses on the switch is displayed.

Time

Symptom

Time is not in-sync.

Probable cause and recommended action

NTP is not set up on the switches in your fabric. Set up NTP on your switches in all fabrics in your
SAN and metaSAN.

For more information on setting up NTP, refer to the Fabric OS Administrator’s Guide.