Brocade Fabric OS Troubleshooting and Diagnostics Guide (Supporting Fabric OS v7.3.0) - Manual (Page 114)

98 Fabric OS Troubleshooting and Diagnostics Guide
53-1003141-01
Syslogd configuration
10
20:29:12.638 FCPH write 3 40
00fffffd,00fffffd,00000000,00000000,00000000
20:29:12.638 FCPH seq 3 28
00300000,00000000,000005f4,00020182,0000000
20:29:12.638 PORT Tx 3 40 02fffffd,00fffffd,09a5ffff,14000000
20:29:12.638 FCPH write 9 40
00fffffd,00fffffd,00000000,00000000,00000000
20:29:12.638 FCPH seq 9 28
00300000,00000000,000005f4,00020182,00000000
20:29:12.639 PORT Tx 9 40 02fffffd,00fffffd,09a6ffff,14000000
20:29:12.639 PORT Rx 3 0 c0fffffd,00fffffd,09a50304,00000001
20:29:12.640 PORT Rx 9 0 c0fffffd,00fffffd,09a60305,00000001
20:29:20.804 PORT Rx 9 40 02fffffd,00fffffd,0306ffff,14000000
20:29:20.805 PORT Tx 9 0 c0fffffd,00fffffd,030609a7,00000001
20:29:20.805 FCPH read 9 40
02fffffd,00fffffd,d1000000,00000000,030609a7
20:29:20.805 FCPH seq 9 28
22380000,030609a7,00000608,0000001c,00000000
20:29:20.805 PORT Rx 3 40 02fffffd,00fffffd,02eeffff,14000000
20:29:20.806 PORT Tx 3 0 c0fffffd,00fffffd,02ee09a8,00000001
20:29:20.806 FCPH read 3 40
02fffffd,00fffffd,d2000000,00000000,02ee09a8
20:29:20.806 FCPH seq 3 28
22380000,02ee09a8,00000608,0000001c,00000000
20:29:32.638 FCPH write 3 40
00fffffd,00fffffd,00000000,00000000,00000000
20:29:32.638 FCPH seq 3 28
00300000,00000000,000005f4,00020182,00000000
20:29:32.638 PORT Tx 3 40 02fffffd,00fffffd,09a9ffff,14000000
20:29:32.638 FCPH write 9 40 00fffffd,00fffffd,00000000,00000000,
00000000
20:29:32.638 FCPH seq 9 28
00300000,00000000,000005f4,00020182,00000000
20:29:32.639 PORT Tx 9 40 02fffffd,00fffffd,09aaffff,14000000
Syslogd configuration
The system logging daemon (syslogd) is an IP-based service for logging system messages made
available by default on UNIX and Linux operating systems. It is available as a third-party application
for Windows operating systems.
Fabric OS can be configured to use a UNIX-style syslogd process to forward system events and error
messages to log files on a remote host system. The host system can be running UNIX, Linux, or any
other operating system that supports the standard syslogd functionality.
Fabric OS supports UNIX local7 facilities (the default facility level is 7). Configuring for syslogd
involves configuring the host, enabling syslogd on the switch, and, optionally, setting the facility
level.