Power cords, Table 25 – Brocade VDX 8770-4 Hardware Reference Manual User Manual
Page 107
Brocade VDX 8770-4 Hardware Reference Manual
87
53-1002563-04
Power cords
A
The ports meet all required safety standards. For a listing of these standards, refer to
Power cords
The types of power cords provided with the Brocade VDX 8770-4 are specific to the country where it
is installed. For each of the types of power cords in
, the end that connects to the Brocade
VDX 8770-4 has an IEC 60320/C19 cable connector. The AC power receptacles on each power
supply are equipped with IEC 60320/C20 power connectors.
In order to connect to a power strip already installed in a cabinet, the C20, 20A-250V, 12 AWG
power cord is required.
To order a power cord, contact your Brocade VDX 8770-4 supplier.
100 GbE CFP2
SR10
Typical 850
(840 min - 860
max)
OM3, OM4
50
OM3 - 100m (328.1 ft)
OM4 - 150m (492.1 ft)
100 GbE CFP2 LR4
WDM
1294.53 - 1296.59
1299.02 - 1301.09
1303.54 - 1305.63
1308.09 - 1310.19
SMF G.652
10
10 km (6.2 mi)
TABLE 24
Supported optics (Continued)
Speed
Wavelength
Fiber type
Cable core diameter
(microns)
Maximum cable distance
TABLE 25
Power cord types (international)
Country
Plug style
NEMA 5-20P
125V only
USA, Canada,
Mexico, other
locations
NEMA L6-20
USA, Canada,
Mexico, other
locations
CEE-7/7
“Schuko”
Continental
Europe
BS-1363A
AS 3112
Australia/New
Zealand
IEC-60309
32A-6h, 230V~
C20
20A-250V
12 AWG
connect to
in-cabinet
power strip only
All locations
Argentina
X
X
Australia
X
X
Austria
X
X
Bahrain
X
X
Belgium
X
X
Brazil
X
X
X