5 digital effects | master control, 1 the digital fx (effects) menu, 5 digital effects | master – PreSonus StudioLive 24.4.2 User Manual
Page 64: Control — 60, 1 the digital fx (effects) menu — 60, 5digital effects | master control
60
5
Digital Effects | Master Control
5.1
The Digital FX (Effects) Menu
StudioLive™ 24.4.2/16.4.2
Owner’s Manual
5
Digital Effects | Master Control
From the Digital Effects | Master Control section, you can select and
change the parameters of the two internal effects processors, and you can
store and recall every setting on the StudioLive. Because almost all of the
StudioLive’s features are controlled from the mixing surface (rather than
using menus and submenus), you will mainly use this section to adjust the
internal effects processors and to save and recall presets and Scenes.
Power User Tip: With all menus, the StudioLive remembers which page you were on
when you navigated away to another menu. To quickly jump to page 1, simply press the
menu’s button twice (e.g., to return to page 1 of the FX Menu, press the FX button twice).
5.1
The Digital FX (Effects) Menu
The StudioLive features two internal effects processors. Each processor can access
the StudioLive’s selection of high-quality reverbs and delays. Each of these effect
buses can be routed to any of the subgroups, the aux buses, or the main outputs.
To access the effects library and make adjustments to effect parameters, press the FX
button in the Master Control section.
The first page of the FX menu is the QuickView screen. It displays both
of the effects assigned to the internal effects buses and the main
parameter for each. Effect A is assigned to EFX A bus, and Effect B is
assigned to EFX B bus.
Use the Next and Prev buttons to navigate through the screen.
To change a parameter, use the Value encoder directly beneath the
LCD screen. The color will invert for each parameter when it is selected
for modification.
The Next button will scroll through this screen in the following order: FX A library
selection, FX A main parameter, FX B library selection, FX B main parameter.
When choosing your effects preset, use the Value encoder to scroll through
the library.
When you have arrived at your selection, press the Recall button to load it.
Press the Page Down button to move to the next page of the FX menu. Pages 2 and
3 of the FX menu display the rest of the parameters for FX A and FX B, respectively.
These parameters will change depending on what type of effect you have chosen.
Again, use the Next and Prev buttons to navigate through the screen and use the
Value encoder to change the selected parameter.