beautypg.com

PreSonus StudioLive 24.4.2 User Manual

Page 40

background image

36

4

Controls

4.1

The Fat Channel

StudioLive™ 24.4.2/16.4.2

Owner’s Manual

High EQ Gain Control. Sets and
Displays the Gain Attenuation or
Boost at the Center Frequency of
the High Frequency Band.
This encoder sets, and the meter
displays, the gain cut or boost at
the center frequency of the High
EQ band. The level of the center
frequency can be set between
-15 and +15 dB.



High Shelf EQ Button. Turns on
the High Shelving EQ for the
Selected Input or Output Bus.
When the Shelf button is not
engaged, the High band is a
parametric EQ. Enabling the Shelf
button turns the High band into
a high shelving EQ that alters,
by a fixed amount, a band of
high frequencies at and above a
user-selected shelving frequency.
Power User Tip: A high shelving
EQ is like a treble-control knob
on a stereo. In this mode, the
Center Frequency control selects
the shelving frequency.

Limiter On/Off Turns on the
Limiter for the Selected Input
Channel or Output Bus.
When the limiter is engaged
the button will illuminate.
The ratio is ∞:1.
StudioLive 16.4.2 only:
The threshold for the
limiter is set to 0 dBFS.
The Limiter is available on all
input and output buses.
Limiter Threshold (StudioLive
24.4.2 only)
Sets and Displays
the Threshold of the Limiter for
the Selected Channel or
Output Bus.
This encoder sets, and the meter
displays, the threshold of the
limiter for the selected channel
or output bus. When the signal’s
amplitude (level) exceeds the
threshold setting, the limiter
is engaged. Turning the knob
counterclockwise lowers the
threshold, so limiting begins at a
lower amplitude. The threshold
can be set from -56 to 0 dB.

This manual is related to the following products: