Yokogawa Standalone MW100 User Manual

Page 98

98/131 -

IM MW100-S16E-1
Ed01

2.5.11. DNP slave/server object table setting (WV)

This command is used to configure object table of DNP slave/server. For
implementing DNP communication functions, this command is added.

WV p1, p2, p3, p4, p5

p1 : Object type (IO_B, IO_A, MATH_B, MATH_A,

COM_B,

COM_A)

IO_BI :

Binary Input object for I/O channels

IO_AI :

Analog Input object for I/O channels

IO_BO :

Binary Output object for I/O channels

IO_AO :

Analog Output object for I/O channels

MATH_BI :

Binary Input object for Math channels

MATH_AI :

Analog Input object for Math channels

COM_BO :

Binary Output object for Comm. channels

COM_AO :

Analog Output object for Comm. channels

p2 : Top channel number to map (001 to 060,

A001

A300,

C001

C300)

001 to 060 :

in case p1 is IO_xx

A001 to A300 : in case p1 is MATH_xx

C001 to C300 : in case p1 is COM_xx

p3 : Mapping data count (0 to 60, 0 to 300)

0 to 60 :

in case p2 is 001 to 060

0 to 300 :

in case p2 is A001 to A300 or C001 to C300

p4 : Event class (NONE, 1 to 3)

NONE

does

not

generate

event

1 to 3 :

assign Class 1 to 3

Unless DNP option is specified, command can't be used.