Yokogawa Standalone MW100 - Manual (Page 67)

-
67/131 -
IM MW100-S16E-1
Ed01
Table 31. Parameters for configuring DNP protocol stack behavior (1/2)
Kind Configuration
Application
Confirmation
Behavior of application layer confirmation
- selectable from ”Never”, “Always”, “Sometimes”
- Never : Never require confirmation
- Always : Always require confirmation
- Sometimes : Require confirmation only when
multi-fragment is sent
Application
Timeout
Limit of waiting time for application layer confirmation
- configurable within 1 to 60
- When confirmation is not received over the limit,
DNP slave/server will retry to send the fragment
Application
Retry Count
Maximum count to re-send the fragment
- configurable within -1 to 5
- In case of -1, DNP slave/server will retry sending
until the message is confirmed
- When confirmation is not received over the count,
DNP slave/server will discard the fragment
Application
Fragment Size Maximum size of sending fragment
- configurable within 200 to 8192 [byte]