Yokogawa Standalone MW100 - Manual (Page 20)

-
20/131 -
IM MW100-S16E-1
Ed01
2.2.3.2. Configuration of polling period and action
Screens for configuring polling period and action of DNP master/client functions are
shown in Figure 8 and Figure 9. In case the integrity or event poll is not needed, turn
off the polling action. About the detail of the configuration, refer the explanation of
Table 10.
Figure 8. Configuration of polling period and action for DNP master
Polling period
Polling action
Screen of DNP 3.0 master setting 1
Screen of DNP 3.0 master setting 2