Yokogawa Standalone MW100 - Manual (Page 47)

-
47/131 -
IM MW100-S16E-1
Ed01
2.3.4. Configuration of object table of DNP slave/server
To use DNP slave/server functions of MW100, user should configure the object table
which describes the mapping information between DNP objects and MW100 channels.
Data mapping between DNP objects and MW100 channels are shown in Figure 24. In
MW100, index number assigned to each channel is fixed regardless of the destination
object types.
Figure 24. Data Mapping between DNP objects and MW100 channels
Binary Input (1),
Analog Input (30),
0 to 59
0 to 59
Binary Input (1),
Analog Input (30),
1000 to 1299
Binary Output (10),
Analog Output (40),
2000 to 2299
2000 to 2299
1000 to 1299
I/O channel
(001 to 060)
Math channel
(A001 to A300)
Comm. Input channel
(C001 to C300)
I/O
Compute
DNP objects
（ MATH）
Binary Output (10),
Analog Output (40),
0 to 59
0 to 59
MW100 channels