Yokogawa Standalone MW100 - Manual (Page 26)

-
26/131 -
IM MW100-S16E-1
Ed01
2.2.4. Configuration of command table of DNP master/client
To use DNP master/client functions of MW100, user should configure the command
table which describes the mapping information between DNP objects and MW100
channels. Screens for configuring command table of DNP master/client functions are
shown in Figure 12 and Figure 13. About the detail of the configuration, refer the
explanation of Table 12.
Figure 12. Configuration of command table of DNP master
Screen of DNP master setting 3
Command setting table