Enabling dnp master/client functions – Yokogawa Standalone MW100 User Manual

Page 13

Text mode
Original mode

13/131 -

IM MW100-S16E-1
Ed01

2.2.2. Enabling DNP master/client functions

To use DNP master/client functions of MW100, user should enable these functions at
first. Required steps to enable DNP master/client functions are shown in Figure 4 and
Figure 5. About the detail of the configuration, refer the explanation of Table 6 and
Table 7.

Figure 4. Required steps to enable DNP master function

[step 3] enable the master function

[step 1] select the function (driver)

[step 2] configure the master DNP address

Screen of serial communication setting

Screen of DNP 3.0 master setting 1