Yokogawa Standalone MW100 - Manual (Page 87)

-
87/131 -
IM MW100-S16E-1
Ed01
2.5. DNP configuration commands
Extended or added commands to the MW100 specific service (34318/tcp) is shown in
Table 42. Current setting of each command can be acquired with query operation, and
new settings are accepted only at setting mode and administrator level.
Table 42. Extended or added commands for DNP communication functions
Cmd. Function State Query Mode Level Page
YS Serial communication setting Ext Ok Set Admin P. 88
WS Enabling server function Ext Ok Set Admin P. 88
WC Enabling client function Ext Ok Set Admin P. 90
WM DNP master action setting Add Ok Set Admin P. 91
WN DNP master destination setting Add Ok Set Admin P. 92
WO DNP master command table setting Add Ok Set Admin P. 93
WP DNP client action setting Add Ok Set Admin P. 94
WQ DNP client destination setting Add Ok Set Admin P. 95
WR DNP client command table setting Add Ok Set Admin P. 96
WU DNP client/server address setting Add Ok Set Admin P. 97
WV DNP slave/server object table setting Add Ok Set Admin P. 98
VV DNP slave destination setting Add Ok Set Admin P. 100
VW DNP server destination setting Add Ok Set Admin P. 101
WW DNP application service setting Add Ok Set Admin P. 100
WX DNP application layer setting Add Ok Set Admin P. 103
WY DNP datalink layer setting Add Ok Set Admin P. 104