Yokogawa Value Series FX1000 - Manual (Page 9)

1-2
IM 04L21B01-63EN
1.2 Required PC System Environment
Hardware
Personal Computer
A computer which runs on Windows XP, Windows Vista, or Windows 7.
CPU and Main Memory
• When Using Windows XP
Pentium III, 600 MHz or faster Intel x64 or x86 processor; 128 MB or more of memory
• When Using Windows Vista
Pentium 4, 3 GHz or faster Intel x64 or x86 processor; 2 GB or more of memory
• When Using Windows 7
32-bit edition: Intel Pentium 4, 3 GHz or faster x64 or x86 processor; 2 GB or more of
memory
64-bit edition: Intel x64 processor that is equivalent to Intel Pentium 4, 3 GHz or faster;
2 GB or more of memory
Hard Disk
A free space of 100 MB or more (more space may be required, depending on the amount
of data stored).
CD-ROM Drive
To be used for installing the software.
Mouse
A mouse supported by Windows.
Monitor
A video card that is recommended for the OS and a display that is supported by the OS,
has a resolution of 1024×768 or higher, and that can show 65,536 colors (16-bit, high
color) or more.
Interface Port
When communicating through RS-232, use a COM port (COM1, COM2, COM3, or
COM4) supported by Windows.
When communicating through RS-422/RS-485, connect a converter to an RS-232 port.
To communicate through an Ethernet connection, you need an Ethernet card supported
by Windows. Also, the TCP/IP protocol must be installed.
Printer
A printer supported by Windows is required. An appropriate printer driver is also
required.
Operating System (OS)
OS Version
Windows XP Home Edition SP3
Professional SP3 (excluding x64 Editions)
Windows Vista Home Premium SP2 (excluding 64-bit editions)
Business SP2 (excluding 64-bit editions)
Windows 7 Home Premium, SP1 (32- or 64-bit edition)
Professional, SP1 (32- or 64-bit edition)
Note
• The time zone can be set in [Date/Time] which can be opened from [Control Panel].
• If daylight saving time is used, mark the check box of “Automatically adjust clock for daylight
saving changes”.
• The time zone should not be set using the autoexec.bat file. If “TZ=GTM0” is set in the file,
specify “rem” to disable it.
• Data created in 2038 or later cannot be handled.
• The font “Courier New” needs to be installed on your personal computer.