Yokogawa Value Series FX1000 - Manual (Page 35)

2-26
IM 04L21B01-63EN
Using the Menu Bar
On the menu bar, select [Window] - [Link] to display the [Link File] dialog box.
1. Click here
(display files for linking).
2. Select [Prev] (previous file), [Next] (subsequent file), or [All] (all files).
4. Displays the linked files.
3. Displays the linked files in a different color.
When the link settings file is saved (see the next page),
the extension .ldx is appended to the original file name.
Note
• When linking and displaying files, make sure that the number of data points after linking
does not exceed 5242880.
In addition, if there is a period over which data does not exist such as when a power failure
occurs, data is counted as if the data is acquired at the given scan interval even during that
period. The scan interval and the maximum period for linking files are indicated below.
Interval Period
25 ms 36.4 hour
125 ms 7.5 days
1 s 60.6 days
10 s 606.8 days
For example, if data is captured continuously at a 125-ms interval and there is a one or
more week long power failure, the data from before and after the power failure cannot be
linked and displayed.
• If you open a file that was created prior to a time change on the recorder and then link
subsequent files, files from the open file up to the point of the time change are linked. If you
open a file that was created after a time change on the recorder and then link previous files,
files starting from the point of the time change are linked.
Starting (open) file
Time
Time
Recorder time changed
Starting (open) file
File created during the time change
File created during the time change
Files up to this file can be linked
Files starting from this file can be linked
• The linked data display is based on the time of the starting file.
2.5 Linking Files and Saving the Link Settings File