Yokogawa Value Series FX1000 - Manual (Page 28)

2-19
IM 04L21B01-63EN
Displaying Data
1
2
3
Index
Deleting Marks
1. Place Cursor A and Cursor B so that
the mark is between the two.
2. Select [Edit] - [Delete Mark].
The arbitrary marks (green/yellow) and trigger marks (yellow) between Cursor A and
Cursor B are deleted.
Note
• The arbitrary marks placed on the Data Viewer are green. The arbitrary marks (messages)
and trigger points placed on the recorder are yellow.
• Up to 32 characters can be used for a mark name.
Resetting Marks
If you select [Edit] - [Reset Mark] on the menu bar, all the arbitrary marks that have been
created on the Data Viewer will be deleted. The marks (messages) and the trigger point
that were created on the recorder but deleted on the Data Viewer are displayed again.
2.2 Displaying the Waveform