Yokogawa Value Series FX1000 - Manual (Page 26)

2-17
IM 04L21B01-63EN
Displaying Data
1
2
3
Index
Displaying Statistics
The first data number of the
computed region (Cursor A)
1. Click here ([Window] - [Statistics]).
2. The statistics display screen opens.
The last data number of the
computed region (Cursor B)
Note
1
n
(x ) 2
k=0
n-1
k
k
RMS =
n : Number of data
x : value
Σ
The minimum value, maximum value, P-P, mean, and rms value for each waveform in
the range specified by Cursors A and B are computed and displayed. If the cursor is not
displayed, the computation is performed over the entire data.
As the results of the computation do not update automatically, you must click the [Re-
Calc.] button in the [Statistics] dialog box to update the computed results if you change
the position of Cursor A or B.
Adding Arbitrary Marks
2. Click here ([Edit] - [Append Mark]).
4. After entering the
string, selecting the
displayed position,
or selecting whether
the time is displayed,
click the [OK] button.
3. The [Mark Settings] dialog box opens.
Arbitrary mark
1. Using the mouse, click
the position that you want
to add an arbitrary mark at.
When Cursor A and Cursor B are at the same position, arbitrary marks can be placed.
You can select whether to put the arbitrary marks on all groups or only on the displayed
group. And you can set the displayed position of the mark and select whether the time is
displayed by the mark.
The displayed time is either the absolute time or relative time depending on the time axis
setting.
2.2 Displaying the Waveform