Yokogawa Value Series FX1000 - Manual (Page 25)

2-16
IM 04L21B01-63EN
Displaying the Cursor Values
1. Click here ([Window] - [Control]).
Alarm display
(Displays the conditions of alarm 1, 2, 3, and 4 from the left)
The values of Cursor A and B
on the waveform display screen
Cursor movement button
2. The [Control] dialog box opens.
A list of Cursor A and B values and their differences on the waveform display screen is
displayed. You can change the values of Cursor A and B by clicking the cursor movement
buttons.
When the alarm display is turned ON, the alarm conditions are displayed. When an alarm
is in effect, the indicator is red. When it is not, the indicator is green.
Displaying Numeric Values of Abnormal Data
The abnormal data are displayed as follows:
+OVER: Measured/computed data are over the positive limit
-OVER: Measured/computed data are under the negative limit
LACK:
Computation error or data dropout
Note
When a cursor is not displayed on the waveform display screen, the cursor’s value display area
becomes blank. Difference becomes INVALID.
2.2 Displaying the Waveform