Yokogawa Value Series FX1000 - Manual (Page 32)

2-23
IM 04L21B01-63EN
Displaying Data
1
2
3
Index
2.4 Displaying Numeric Values
Displaying Numeric Values
1. Click here ([Window] - [Sheet]).
Absolute or relative time
Waveform label (Channel number or tag)
Click here to make the waveform active
Mark on the active waveform
Alarm display (Displays the conditions of
alarm 1, 2, 3, and 4 from the left)
2. The numeric display screen opens.
Scroll the screen
Mark (Yellow: Trigger mark or message,
Green: Arbitrary mark)
General Display Settings of the Numeric Display
Click the general display settings icon, or select [View] - [General Display Settings] on
the menu bar to display the [General Display Settings] dialog box. Of the parameters in
the [General Display Settings] dialog box, those that relate to the numeric display are as
follows:
• Normal or Exponential display of numerical values
• Registering the channel and turn the display ON or OFF
For details related to the setting procedures, see “General Display Settings” in section 2.2,
“Displaying the Waveform.”
Setting the Time Axis
On the menu bar, select [View] - [Absolute Time] or [View] - [Relative Time].
Turn ON/OFF the Alarm Display
The alarm conditions of alarms 1 to 4 are displayed on the screen by clicking the alarm
display icon or selecting [View] - [Alarm] and turning ON the alarm display. When an
alarm is in effect, the indicator is red. When it is not, the indicator is green.
Waveform Labels (Selecting the channel identification strings)
For details, see “Waveform Labels (Selecting the channel identification strings)” in
section 2.2, “Displaying the Waveform.”