Yokogawa Value Series FX1000 - Manual (Page 23)

2-14
IM 04L21B01-63EN
Changing the Grid Display
To select the grid type, click one of the grid density icons on the toolbar, or click [Y-Axis]
on the menu bar.
Switch the grid density
Grid Display Examples
[Y-Axis] - [Standard Grid] [Y-Axis] - [Dense Grid1] [Y-Axis] - [Dense Grid2]
Waveform Display Limit (clip)
To enable the waveform display limit, click the clip icon ( ) on the toolbar, or select
[Y-Axis] - [Clip] on the menu bar. When the limit is enabled, the waveform’s Y-axis display
range is limited to the minimum and maximum values that you have set under [General
Display Settings] - [Scale]. Measured values that are less than the minimum value are
set to the minimum value and values that are greater than the maximum value are set to
the maximum value.
• Example in which Display Limit is Enabled
• Example in which Display Limit is Disabled
Turn ON/OFF the Alarm Display
1. Click here ([View] - [Alarm]).
2. The alarm is displayed.
Alarm display
No alarm
Alarm occurrence
Alarm 1
Alarm 2
Alarm 3
Alarm 4
2.2 Displaying the Waveform