Yokogawa Value Series FX1000 - Manual (Page 16)

2-7
IM 04L21B01-63EN
Displaying Data
1
2
3
Index
Note
The color overview is turned OFF as default.
General Display Settings
You can use this to change the channels that are registered to groups, create new
groups, and change the display format.
1. Click here ([View] - [General Display Settings]).
Group selection tab
Turn ON/OFF waveform display (Blue is ON)
Turn ON/OFF at once
Select waveforms by clicking their number or by dragging the mouse pointer.
Click No. to toggle between selecting all waveforms and selecting no waveforms.
Activate the settings and close the dialog box
Assign numbers to the channels in the selected range in ascending order
Register the channel
Show/Hide the Y-axis
Copy the settings of the first channel in the selected range
to all other channels
Initialize
Copy the setup data of the
selected waveform number
Select the items to be copied
Pastes the copied
settings to the
copy destination
Enter the group name
Select linear or logarithmic (each click switches between the two settings).
Select normal display or exponential display
(orange indicates that the exponential display has been selected).
Show/Hide the trip line
Enter the trip line
Enter the display position
Enter the display range
Display color
Set the scale intervals.
2. The [General Display Settings] dialog box opens.
Set the maximum and minimum values of the measured
data to the maximum and minimum values of the scale.
2.2 Displaying the Waveform