Yokogawa Value Series FX1000 - Manual (Page 47)

2-38
IM 04L21B01-63EN
2.11 Converting the Data
Measured data can be converted into ASCII, Lotus, and Excel formats.
On the menu bar, select [Convert] - [To Excel], [Convert] - [To ASCII], or [Convert] - [To
Lotus]. The [Conversion Details] dialog box appears.
When Viewing the Waveform Display or Digital Display
3. Change the save
destination.
1. Enter the conversion range.
2. Select either one.
Save destination and file name
Start Point and End Point
Cursor A and Cursor B are used to set the start point and end point of the range,
respectively. If Cursor A and Cursor B are not specified or the cursors were erased, the
data numbers of the start and end points are automatically set to “0” and “total number of
data points - 1”, respectively.
To convert all the data in the specified range, set the step number to 1.
Step
To convert all the data in the specified range, set the step number to 1.
Group/Channel
If you select [Group], enter the range of groups to be converted.
If you select [Channel], enter the range of channels to be converted.