Yokogawa Button Operated MV2000 - Manual (Page 77)

4-25
IM 04L47B01-01EN
1
2
3
4
5
Index Index
Data D
splay Methods
Addng a mark
1. Point with the cursor
2. Click here (select Edit > Append mark from the menu bar)
3. Set mark Display/No display,
Display position, Group, Title,
and Comment then click [OK]
When cursor A and cursor B are at the same position, an optional mark can be added.
Select whether the optional mark is to be added in common for all groups or only for
the displayed group. The mark title and the display positions for the comment also can
be selected. The mark title can be entered with up to 60 single-byte characters, and the
mark comment can be entered with up to 250 single-byte characters.
Display position: Left Display position: Right
No display
When a mark is double-clicked, the “Append mark”
dialog box is displayed and edition can be done
Marks added with DAQManager are displayed
in green.
Marks added with the recorder are displayed
in orange.
The mark position can be moved by dragging
Display/No display switching
Message dsplay
For messages created with the recorder, Show or Hide can be selected by selecting
the group displaying the message in the “General Display Settings” dialog box for each
tag. The group at this time is not the group name displayed in the DAQManager graph,
but the display group in the file set by the recorder. Multiple groups or all groups can
be selected for message display, and setting is possible for each tag. Hiding with no
selection is also possible.
Mark deleton
When a mark is enclosed between cursor A and cursor B,
select Edit > Erase mark from the menu bar or click the
“Erase mark” icon
Erase Mark
Marks added with the recorder (displayed as “Message”) cannot be edited or deleted.
4.7 Cursor Use