Yokogawa Button Operated MV2000 - Manual (Page 69)

4-17
IM 04L47B01-01EN
1
2
3
4
5
Index Index
Data D
splay Methods
Vertcal movement of the Y-axs
The operation examples for detailed mode are shown below. The same movement is
also made in compact mode.
Place the mouse cursor, and when it has become this mark,
drag to move the Y-axis in vertical direction
Dragged state State when moved up
Y-axs zoom n/zoom out
The operation examples for detailed mode are shown below. The same operation is also
performed in compact mode.
Zoom in/zoom out is centered around the point where the mouse is clicked.
The factors are 20, 10, 5, 2, 1, 1/2, 1/5, 1/10, and 1/20.
Move the mouse cursor to any position on the
Y-axis and click when it becomes this mark
When this display is reached, operate the mouse
wheel up or down to magnify or reduce the Y-axis
display or click to magnify/reduce the Y-axis
based on the factor display position
Y-axs mode swtchng
Y-axis slide mode
Y-axis free mode
Y-axis auto mode
Y-axis full mode
Select from the following. The display examples for each zone are shown on the next
page.
• Y-axis full mode
: Full zone display for all waveforms
• Y-axis auto mode : The waveform display area is displayed uniformly divided
according to the number of tags.
• Y-axis slide mode : The tags are displayed in the waveform display area
sequentially from the top.
• Y-axis free mode : Each tag is displayed in the display range set by “Zone” in the
“Detail settings” dialog box (Y-axis resizing is possible).
(Continued on the next page)
4.5 Changng the Waveform Dsplay