Yokogawa Button Operated MV2000 - Manual (Page 54)

4-2
IM 04L47B01-01EN
Waveform dsplay from a data lst
Procedure
New dsplay of data
1. Click any list display type of “Data” of the navigation window.
List display is performed for the data.
2. Click any data in the data list.
Clicking here causes display of the name of the device
which collected the imported data
List display of the data is made when the list display type is clicked
Select the data for waveform display from the data list
Properties of the
selected data
Waveform window display
Waveform file display
Waveform additional display
3. Select Vew > Dsplay (dsplay n the same wndow) from the menu bar, click
the “Waveform wndow dsplay” icon, or right-click and select [Dsplay (dsplay
n the same wndow)].
A new waveform window opens and the data are displayed as waveform.
Note
Waveform display can be done simply by double-clicking the data for which waveform display is
to be performed instead of steps 2 and 3.
Addtonal dsplay of data
4. Click the data to be added from the data list.
5. Select Vew > Addtonal dsplay n the actve wndow from the menu bar,
click the “Addtonal waveform dsplay” icon, or right-click the data and select
[Addtonal dsplay n the actve wndow].
Data are displayed additionally in an existing active waveform window.
Dsplay waveform n entre fle
1. Perform steps 1 and 2 of “New display of data.”
2. Select Vew > Dsplay entre fle from the menu bar and click the “Waveform
fle dsplay” icon, or right click and select [Dsplay entre fle].
The data are displayed in file units.
4.1 New Dsplay of Data and Addtonal Dsplay