Asante Technologies Intrachassis 9000 - Manual (Page 91)

Viewing Current Operating Information
Page 3-49
Table 3-11 General Information settings
Setting Description
System Up Time The amount of time the system has been running since last reset
or power on.
Bank 1 Image Version/
Date The version and compilation date of the runtime code that is
stored in Bank 1. (Running) indicates code is currently active.
Bank 2 Image Version/
Date The version and compilation date of the runtime code that is
stored in Bank 2.
Prom Image Vers/Date The version and compilation date of {{what?}}.
DRAM Size The size in megabytes (MB) of the unit’s Dynamic Random
Access Memory.
EEPROM Size The size in megabytes (MB) of the unit’s EEPROM.
Flash Size The size, in MB, of the switch’s flash memory, or non-volatile
RAM.
Console Baud Rate The current rate which data transfers to the console from the
IntraChassis 9000.
System Name The name assigned to the IntraStack for network purposes.
System Location The physical location of the IntraStack.
System Contact Person responsible for configuration of the unit.
MAC Address The hardware address of the IntraChassis 9000; this address can-
not be changed
IP Address The unit’s IP (Internet Protocol) address.
Subnet Mask The IP subnet mask for the IntraChassis 9000.
Router The IP address of the default gateway router to which the switch
belongs.
Boot Load Mode The current method in use for loading the switch’s software.
GLXY9.book Page 49 Thursday, February 17, 2000 3:04 PM