Asante Technologies Intrachassis 9000 - Manual (Page 40)

Installation and Set-up
Page 2-20
◆
Note: For a description of each parameter on the General
Information Screen, see “Viewing Current Operating Infor-
mation” on page 3-48.
To exit the General Information Screen, press any key on your keyboard.
Configuration Menu
The Configuration Menu allows you to manage and configure the IntraChassis
9000 and each of its ports.
Logging into the Configuration Menu
1
Type c from the Local Management Interface Main Menu.
2
Enter your password at the “Enter Password” prompt, then
press Return.
▲ Important: The default password is Asante. The pass-
word is case-sensitive; enter it exactly as shown. For
information on changing the password, see “Changing
the Password” in Chapter 3.
The Configuration Menu appears, as shown in Figure 2-5.
Figure 2-5 Configuration Menu
IntraChassis 9000 Configuration Menu
a System Administration Configuration
i System IP Configuration
b Bootstrap Configuration
n SNMP Configuration
p Port Configuration
d Unicast Forwarding Database Configuration
f File Downloading Configuration
r System Reset Options
l System Log
u User Interface Configuration
s Spanning Tree Configuration
t Security Management
v VLAN Management
q Return to previous Menu
Command>
GLXY9.book Page 20 Thursday, February 17, 2000 3:04 PM