Asante Technologies Intrachassis 9000 - Manual (Page 58)

Basic Configuration
Page 3-16
Viewing Legends for Configuration Settings
To see legends explaining the symbols used for both the basic and global port
configuration menu settings, type h. A screen similar to Figure 3-8 appears.
Figure 3-8 Legends for all Port Configuration menus
Legends for port status: Legends for port speed & duplex:
X - Absent f - 10 Mbps & full duplex
- - Link down F - 100 Mbps & full duplex
D - Disabled by Mgmt Action h - 10 Mbps & half duplex
d - Disabled by Security Violation H - 100 Mbps & half duplex
B - Blocking
S - Listening
R - Learning
Legends for port priority:
+ - Forwarding (The range is from 0 to 3)
0 - priority 0 (lowest)
Legends for Enable/Disable State: 1 - priority 1 (lower)
- - Disabled 2 - priority 2 (higher)
* - Enabled 3 - priority 3 (highest)
Legends for Auto-Negotiation Advertisement:
A - 100Base-TX full duplex mode
B - 100Base-TX half duplex mode
C - 10Base-T full duplex mode
D - 10Base-T half duplex mode
Press any key to continue...
GLXY9.book Page 16 Thursday, February 17, 2000 3:04 PM